4.09 (2022-09-26) Improvements: - AES50 port watchdog implemented - Support for new and future hardware versions Bug Fixes: - Several instability issues fixed - S16/DL16 headamp control bug fixed - DCA solo (ST/M/MTX) fixed - LR mute LED fix -------------------------------------------------------------------------------- 4.06 (2021-03-09) Improvements: - Matrix, M/C, and LR channels can be assigned to DCA and mute groups - Snippets can now contain the Stereo Bus LR switch parameter - Parameter Safe for control surface state - DCA Spill doesn't move unused faders Bug Fixes: - Fixed DCA Spill color and mute group assign issues -------------------------------------------------------------------------------- 4.04.1 (2020-11-27) Bug fixes: - Fix for sporadic hang-up of comms with Behringer X-TOUCH controller 4.04 (2020-11-18) New features: - DCA-Spill - Press SELECT on DCA to see associated channels (flashing SELECT on DCA) - Hold SELECT on DCA to change DCA assignment (flashing SELECT on channels) - Press DCA layer button to toggle between DCA-Spill pages - Change left fader layer or hold DCA layer button to disable DCA Spill (Active DCA-Spill is indicated by flashing DCA layer button) Improvements: - Improved interoperability with X-Touch - Gain/Trim issue on CH 1-8 - Issue with send pan indication when using sendPanFollowsLR - Improved Copy/Pasting of dynamic settings for MTX/ST/M Bug fixes: - Prevent freeze when using Snippet-Utility - Fixed send pan LED-Ring indication when using sendPanFollowsLR - Hide folder names with non ASCII characters -------------------------------------------------------------------------------- 4.03 (2020-10-06): New features: - variable scrolling speed for spectrograph - Library AES50 - DP48 remote support for stereo link & talkback messages - improved transmission of DP48 messages through stageboxes and hubs Improvements: - Channel - bring pan back to center when unlinking (if +-100) - X-Live-Card: - show warning when SD card is close to maximum capacity (10min / 1min remaining) - showing protected SD card state - better backup progress bar - showing naming prompt when exporting a scene to USB - better support when importing a CustomBootState as a scene - CustomBootState can now be auto-loaded without a confirm dialog (append _NoPopUp to the filename) - hold and scroll on snippets/safes - added name prompt when exporting to USB Bug fixes: - HA gain control not updating digital trim when using User-Banks - Fixed long Session-Name display - Fixed show import/export popup text redrawing - checking User-Blocks param safe and scene safe when loading an old scene -------------------------------------------------------------------------------- 4.02 (2020-01-21): New features: - Welcome-Screen on first power up after an update (Select the Firmware header on Setup-Global page to display again) - CustomBootScene.scn can be loaded automatically at bootup and created in the Setup-Global page (also on X32Core/M32C) - CustomLock.bmp and CustomBoot.bmp support (see examples on www.behringer.com) - Routing-Input: cycle through the connected AES devices using the Up/Down arrows - X32Core/M32C: Console backup export and load Improvements: - M32/R : faderboard firmwares reviewed for better behaviour on both slow and fast speeds - showing insert/source details on effects screen - improved conversion of input clocks to user slots (Routing-User In-Utility-6th button) - pressing Select and Utility opens the Name/Icon screen - Xlive locator can be moved using the transport encoders - showing a dialog when trying to use the USB recorder when no USB drive is inserted - updating the TopLeft selected channel box when a popup is shown on screen - added header line to the console.bak file - X32Core/M32C: Error screen when an export fails Bug fixes: - Channel - preventing copied channel window to redraw when copying remotely - Config: changed INHP label to IN/LC - EQ: fixed crossover band type name display and coloured frames redraw - X-Live-Card: - redrawing utility header on session selection - changed the scrub function icon - disabling transport buttons when Mute Groups are open - better SD info redraw when popups are shown - Routing-Input: redrawing connected AES devices when they change - fixed snippet FX4R selection - fixed channel source display when Aux1 is set to AES50 33 - fixed recorder text display on the top of the screen - fixed gain control offset-issue from X-Touch using User-Input - user assign section shows SD session/markers properly - reset User-Blocks when loading scene created with former parameter set -------------------------------------------------------------------------------- 4.01 (2019-12-06): New features: - fast faders option on M32/M32R - dual FX engines copy A->B and B->A - added additionnal FW integrity check after update (prevents soft bricking) - convert Input banks to user slots (in Routing-Input-Utility 6th encoder) - Show control buttons assignable to User assigns (NEXT, PREV, UNDO, and GO) Bug fixes: - Card - fixed Card In/Out pops and cracks - Xlive: - fixed freezing when stopping recording - correcting setting display on 1st screen - cant delete empty session anymore - confusing SD card status display fixed - Dante: preventing white noise when clock frequencies are mismatched - Routing - HA remote availability when forwarding connected HA (for ex, in Stagebox -> MonitorMixer -> FOH configuration) - corrected source display when AuxIn assigned to Local In - corrected routing screen names (for user assign-jump to page / osc screen polling) - input patch overview header changed - Effects - fixed LC curve/sends faders redrawing on FX screens - fixed utility FX rack jumping around when selecting actual FX engine - Library - importing files (presets/show/...) made prior to 2.1 works again - preset number 100 was shown as 10 - Xtouch display corrected (DCA scribstrips update, user slot source display) - inverted "wedge L/R" icon to match scrible strip - Snippet-Utility better redraw - corrected gain reduction scales (chan Gate/Dyn, meters) - TB destination Bus 10 was showing "Bus1" Improvements: - Channel - confirmation dialog when pasting/loading HA config with +48V activated - improved Bus-Config send configuration list - Card - Xlive session name shown again - Dante help text now mentions "Enable Sync to external" setting - Setup - better Name suggestion / Icon scrolling interaction - updating Name/Icon screen on remote changes - factory reset sets TB to external - Routing - Output destination and tap are not set at the same time anymore - Library - FX library tables reviewed - added default monitor presets to factory reset - Monitor - changed oscillator destination order to previous one - Keyboard - keyboard wraps fully (not just line to line) - new folder name can now have numbers, dash and underscore (no other symbol allowed) - reduced flickering on symbols page - reseting Name/Note button on scene save - OSC protocol - "-action/setposition 0" is possible -------------------------------------------------------------------------------- 4.00 (2019-11-13): new features: - point to point user routing, 4 input and 6 output banks (32 in / 48 out) - DP48/HUB4 remote configuration support - DP48 setup page with preset library - send pan optionally follows LR pan function - full backup export/restore function - new keyboard with channel name suggestions/history and keyboard layouts - X32Core/M32C: Export Show function - M32/M32R: V.1 Fader option (forces update of faderboards, requires reboot) - option for coloured RTA bars improvements: - new GUI design - updated channel icons - coloured fader tracks - error/warning popups can be closed using encoders - popup option to perform backup before firmware update - Channel - Config: Low Cut filter curve preview - Config/Sends: Dynamic signal flow display - EQ: hiding unsettable parameters - Utility: copied channel overview - Meters - channel color indicators - Routing - tabs re-organized and grouped by function - output patch overview tables with shortcut to assign output - next button also scolls destination list - iQ setup: improved lists behaviour - Library - scrolling using LOAD encoder offers suitable presets only - Effects - warning message when creating feedback loop (only when using hardware encoders) - Utility: FX rack re-organized by effect category - Utility: copied effect preview - going from effect to library selects active FX slot - Setup - Config: more default bus configurations (all pre/all post) - Name/Icon: more channel name suggestions - Monitor - Talkback: destination preview - Lamp setting moved to new tab in Monitor screens (when available) - Scenes - Cues: cue number 500.9.9 is possible now - Snippets/Safes: select header to select all elements in column - Mute Groups - buttons made more visible on screen