=====================================
= Behringer Wing Firmware Changelog =
=====================================

[3.0.2] - 2024-10-11
====================
Changed
  - increased slope range for ultratap delay fx
  - fx spill updated automatically when fx model changes
Fixed
  - crash when using selected channel send CC encoders
  - crash when changing default matrix mode
  - VSS3 preset scroll box not selectable
  - MIDI CC faders not working for CC > 76

[3.0] - 2024-09-19
==================
Added
  - filter controls on eq page
  - sound maxer frequency response added to filter curve
  - GPIO functions for delayed power on (e.g. for amps)
  - indication of (active) trim/balance in input box
  - on/off switch for limiter in mastering fx module
  - gain trim added to GEQ
  - combo gate plugin (from aux inputs) for all channels
  - CC functions for prev/next channel select
  - CC send functions extended to MAIN1..4 and MTX1..8
  - send fader assign extended to MAIN1..4 and MTX1..8
  - delay on buses
  - input delay on aux channels
  - spill button on insert fx pages
  - bus to bus send from / to all buses
  - channel / aux send to all matrices
  - new send configuration overlay
  - talkback to matrices
  - CC button function for setting metering and solo tap
  - CC button function for channel solo
  - CC encoder function for lamp, glow, patch brightness
  - CC fader set option for -10 dB
  - CC fader set option enabled for touch screen faders
  - bus to bus modes for custom fader layers
  - when custom control name starts with '*' its value is always shown on the lcd
  - aux combo plugin for dynamics slot
  - global option to always show active scene (or snapshot)
  - CC function for selected channel send splill
Changed
  - new files shown in file browser when USB record is started
  - dca spill from right section to center section instead of left section
  - layer offset restored when activating fx spill
  - channel select overlay metering set to input
  - delay mode (unit) option for all bus delays
  - monitor / talkback config page
  - CC channel mute function allows mute override
  - button modes implemented for touch screen talk buttons
  - CC send function allows to control all possible sends
  - warning when bus send to same bus is on (loop)
  - PARTIAL LOAD and PARTIAL UPDATE keep the most recent scope selection
Fixed
  - number of entries in playlist not correct when reloading open playlist
  - automix spill using wrong channels
  - channel preset load showing fx warning even when fx not in scope
  - AES50 I/O highlight function (sources/outputs)
  - firmware update file size check
  - channel detail section delay led control
  - routing lock switch set to unlock when auto+1 was active
  - wing compressor detector switch sometimes shown even when auto env was set
  - crash when a stereo source was routed to more than 5 destinations under very special conditions
  - loading of old fx presets (load button was not active)
  - preselection of scopes (toolbox)
  - short signal drop (limiter release) when loading draw more comp plugin

[2.1] - 2024-05-06
==================
Added
  - status box flashing on errors
  - amber SD icon when card is protected
  - hold monitoring MONO button to flip left/right channel (button blinking)
  - hold monitor section VIEW button to access usb recorder screen
  - source box shows headamp gain
  - meters, gate and comp gain reduction, group and main assignment shown on fader mixer page
  - fader levels on scribble strips
  - snapshot compatibility with new wing variants
  - sends on faders support for bus to bus routing (on left fader area)
  - in fx on fader mode, MUTE allows setting (eq) gains to 0 dB
  - DCA, BUS, FX and automix spill CC functions
  - DCA spill (left to center area and center to left area)
Changed
  - channel presets and toolbox functions now include source gain and phantom settings
  - restart button combination (after shutdown) set to HOME + EFFECTS
  - new Dante logo
  - main/matrix delay control moved to 'send to main' page (gui only)
  - rearranged SETUP screens
Fixed
  - triple DEQ and speaker manager DEQ width with negative gains (now identical to gate slot deq)
  - Custom control MIDI CC PUSH function not sending MIDI data
  - rare race condition when loading snippets containing source settings and input connections
  - customization link could mess up recall of channel/source customizations
  - Midas (blue) stage boxes now shown with solid green status boxes
  - gate sidechain filter bypassed when selecting some gate models
  - sd recorder remaining time display in link mode
  - sd sessions could be edited/deleted while playing
  - rare condition where the console would not sync to external clocks directly after startup
  - exclusive solo option not working on gui fader page
  - fw update function using invalid file name (rare, could lead to console not booting)
  - WING-DANTE with BK3 module not working with BK3 fw 4.2.7.7 (actually an Audinate issue, root cause to be fixed by them)
  - expansion card icon (top) not shown after soft reboot
  - time/date format not saved
  - issue where extended section (right fader section) rotaries were not working after using them for CC

[2.0] - 2023-09-11
==================
Added
  - auto main/alt override switch (SETUP/AUDIO). Previous version behaviour is when this switch is set to on.
  - detailed options for sd recorder auto input switch
  - clear fader layer function
  - option to copy channel send settings to all channels (on send detail page)
  - option to reset/adjust send levels when changing global bus mode
  - sd link switch setting moved to persistent memory (and snapshots)
  - snippets, channel presets, fx presets added to library (old routing presets can be loaded as snapshots)
  - midi control and custom midi tx added to library
  - CC for scene management
  - autoload of show, snapshot, snippet (STARTUP folder in root of data partition), hold LIBRARY to skip autoload during power-on, files need to be named STARTUP.show, STARTUP.snap, STARTUP.snip (they
  - need to start with STARTUP, so STARTUP_myshow.show would also work).
  - CC for FX mix (if not included in plugin parameters), at the very end of the list
  - additional user patches 25-48 allow combining arbitrary sources to stereo user sources (with individual headamp gain and independent mute and polarity)
Changed
  - improved response of the dynamic eqs this is incompatible to existing snapshots, please readjust settings
  - use above with pos gain for dynamic enhancement
  - use above with neg gain to reduce harshness
  - use below with pos gain for dynamic loudness
  - use below with neg gain for noise/bleed reduction
  - SEL double click now always selects the first tab on the home page
  - SEL double click option to select bus insert fx page
  - channel toolbox allows copying to multiple targets (with auto increase of source assignments when more than one target is selected)
  - deadtime for fader autoselect (to reduce channel switching frequency when moving more than one fader)
  - sources for stereo or m/s user signals are no longer linked, please set them both manually
  - user signal customization no longer taken from sources
  - user signal highlight now shows if a signal is assigned to a user source (not if that user source is used)
Fixed
  - UTILITY button backlight and operation (when toolbox and option box are present)
  - issue where solo on buses was activated automatically even when not in sends-on-fader mode
  - global main/alt switch reset to main on boot when sd recorder auto input switch was activated
  - sd recorder now correctly opening a linked single session
  - using the wheel to set sd recorder playback position could lead to inconsistent sd player state
  - cursor control for GEQ faders
  - position of homescreen EQ indicators (gain)
  - selecting linked Wing-Live sessions could lead to console freeze

[1.13.9] - 2023-05-30
=====================
Added
  - peak hold for most of the meters
Changed
  - another change on USB audio interface code to further improve startup sync
  - USB host speed indicator updated when interface speed is actually changed (when idle)
Fixed
  - sd recorder selection and position control issues
  - CC automix enable buttons X/Y swapped

[1.13.8-16] - 2023-04-19
=====================
Changed
  - wheel function
  - on player page: hold 2-TRACK to move song position
  - other pages: hold 2-TRACK to scroll through playlist, or to move song position (when player in pause mode)
  - need to hold MULTITRACK when 'use crsr/wheel' is on to adjust wing-live song position
  - need to hold MULTITRACK when 'use crsr/wheel' and no wing-live card is present to use wheel for- daw control
  - hold SHOW CTRL to use wheel to select scene (when not on library page)
  - modified behaviour of STOP and PLAY for usb player
  - when selected song is different from currently playing song, pressing PLAY will start the selected song instead going into pause mode
  - when selected song is different from currently playing song, pressing STOP will preload the selected song
  - fader firmware updated to support alternative components on fader pcbas
  - change on USB audio interface code that might help to solve those very rare startup issues (leading to noise/distorted audio)

[1.13.8-7] - 2023-04-18
=====================
Added
Changed
  - style of active snap/audio file highlight in file browser
  - send fader overview rearranged
  - lo/hi eq band frequency limits removed (shelvers with limited effective frequency range)
Fixed
  - hold functions of CC mode buttons (2-TRACK .. SHOW CNTRL)
  - backlight of CC cursor buttons
  - possible console slowdown when using cursor buttons
  - missing output level meter scale

[1.13.8] - 2023-04-14
=====================
Added
  - wheel can be used to select scene when SHOW CNTRL button is held
  - option to use cursor buttons and wheel to select/edit on-screen parameters
  - CC button option to show specific fader bank on screen (and select that bank)
  - manual configuration of console options:
  - to register or unregister an internal AoIP module start the console with the UTILITY button pressed
  - go to SETUP/GENERAL and touch the OPTIONS field next to 'CONSOLE'
  - enter MOD-DANTE and press APPLY to register an internal Audinate Dante module
  - enter MOD-NONE and press APPLY to deregister the internal module
  - restart the console
Changed
  - snap restore dialog in red color
  - (first time) lib opens with SNAP subpage selected
  - noise reduced when changing sync source without changing samplerate
  - CC button to show sends page now allows setting a specific send bus
Fixed
  - combinator in fx slot
   - affected by fx algo change in slot
   - (short mute)
  - eq bandtype box redraw issue (eq setup menu)
  - AES50 device I/O 'guide' frame size could be too large
  - issues related to winglive session list and copilot
  - issues related to winglive linked sessions
  - Removed
  - auto-detection of internal AoIP modules no longer possible
  - first boot with this firmware should automatically find and register an Audinate BK2 module
  - if a module is fitted but not found please follow the new manual configuration process

[1.13.7] - 2023-03-15
=====================
Fixed
  - usb recorder using bad filename leading to failure/recording not starting

[1.13.6] - 2023-03-10
=====================
Added
  - improved visibility of active snapshot/song
  - 'SoF activates solo' function expanded to main buses
  - external FX: click on send (output) box opens the output routing page
  - improved color scheme for scopes
Changed
  - some parameters moved for better snapshot recall experience (requires newest apps)
  - snapshot version incremented (8)
Fixed
  - minor issues

[1.13.4] - 2023-02-27
=====================
Changed
  - some cfg nodes moved
Fixed
  - minor issues

[1.13.3] - 2023-02-03
=====================
Added
  - usb host speed selector
Fixed
  - minor issues

[1.13.2] - 2023-01-31
=====================
Added
  - 'add all' button for playlist
  - autoadd option for new snaps
Fixed
  - scrollbar wrong range (playlist/library)
  - snaps/shows/playlists save directory
  - main pre send indication in channel detail section

[1.13.1] - 2023-01-27
=====================
Added
  - CC buttons for send view
  - CC buttons for global automix enable
  - delay factor 1/4 for stereo delay
  - meter subscriptions for 2nd gate/dyn state and automix gain
Changed
  - selected fader bank stored with fader bank recall scope
  - dynamic pos encoder scaling depending on size of winglive session
  - playlist and library changed from directory-based to file-based
Fixed
  - TAP indicator position update
  - winglive v2 updater
  - mute group state/name recall
  - winglive marker pos detection

[1.13.0] - 2023-01-13
=====================
Added
  - solo bus as source for matrix direct inputs (shout mixer)
  - pre-fader option for all sends to main 1-4
  - global automix enable switches
  - sends-on-fader gui page
  - headamp remote control (AES50)
  - source customization sync (AES50)
  - AES50 source indication
  - TCP remote control disable switch (sets all parameters to read-only)
  - CC buttons to set fader to -oo or 0 dB (hold CC and press SEL)
  - option to set gui fader to 0 dB (hold SELECT and touch and hold fader track/knob)
  - preview of scene management
  - touch'n'drag for (snapshot) scopes
  - support for new mainboard and winglive hw
Changed
  - DCA/MGRP assign method changed from group name to fixed tag (#D1..#D16, #M1..#M8)
  - tag color scheme
  - USB recorder page
  - Exciter FX SOLO renamed to DRY
  - OSC frequency control removed when in noise mode
  - source usage display now includes all routings (also to outputs)
  - snapshot version incremented (7)
  - AES50 connection state dark green for stageboxes with 'old' firmware (see issues below)
Fixed
  - SEL button backlight for FX faders
  - visibility of matrix mono status on overview screen
  - visibility of winglive battery status
  - aux eq was bypassed when insert was on and no fx selected
  - possible crash when using fw update function (leaving console with empty OS partition)
  - missing USB midi cable message (after startup)
  - fragmented ip packet assembly bug
  - small persisting red line in output box clip indicator
  - tcp retransmission bug (leading to connection drop with bad wifi)
  - dynamic stage connect routing
  - automix page refresh
Issues
  - when wing consoles are connected to both ports (A/B) of a stage box, headamp control will be lost. This requires a fix/update in the stagebox firmware.
  - old snapshots load slower than usual - save them again to fix
  - Deprecated
  - Removed
  - Changelog

[3.0.3] - 2024-10-14
=====================
Fixed
  - library channel preset scope: sends partially shown as N/A (but function was ok)
  - monitor delays not working
  - matrix direct inputs not working

[3.0.2] - 2024-10-11
=====================
Changed
  - increased slope range for ultratap delay fx
  - fx spill updated automatically when fx model changes
Fixed
  - crash when using selected channel send CC encoders
  - crash when changing default matrix mode
  - VSS3 preset scroll box not selectable
  - MIDI CC faders not working for CC > 76

[3.0] - 2024-09-19
=====================
Added
  - filter controls on eq page
  - sound maxer frequency response added to filter curve
  - GPIO functions for delayed power on (e.g. for amps)
  - indication of (active) trim/balance in input box
  - on/off switch for limiter in mastering fx module
  - gain trim added to GEQ
  - combo gate plugin (from aux inputs) for all channels
  - CC functions for prev/next channel select
  - CC send functions extended to MAIN1..4 and MTX1..8
  - send fader assign extended to MAIN1..4 and MTX1..8
  - delay on buses
  - input delay on aux channels
  - spill button on insert fx pages
  - bus to bus send from / to all buses
  - channel / aux send to all matrices
  - new send configuration overlay
  - talkback to matrices
  - CC button function for setting metering and solo tap
  - CC button function for channel solo
  - CC encoder function for lamp, glow, patch brightness
  - CC fader set option for -10 dB
  - CC fader set option enabled for touch screen faders
  - bus to bus modes for custom fader layers
  - when custom control name starts with '*' its value is always shown on the lcd
  - aux combo plugin for dynamics slot
  - global option to always show active scene (or snapshot)
  - CC function for selected channel send splill
Changed
  - new files shown in file browser when USB record is started
  - dca spill from right section to center section instead of left section
  - layer offset restored when activating fx spill
  - channel select overlay metering set to input
  - delay mode (unit) option for all bus delays
  - monitor / talkback config page
  - CC channel mute function allows mute override
  - button modes implemented for touch screen talk buttons
  - CC send function allows to control all possible sends
  - warning when bus send to same bus is on (loop)
  - PARTIAL LOAD and PARTIAL UPDATE keep the most recent scope selection
Fixed
  - number of entries in playlist not correct when reloading open playlist
  - automix spill using wrong channels
  - channel preset load showing fx warning even when fx not in scope
  - AES50 I/O highlight function (sources/outputs)
  - firmware update file size check
  - channel detail section delay led control
  - routing lock switch set to unlock when auto+1 was active
  - wing compressor detector switch sometimes shown even when auto env was set
  - crash when a stereo source was routed to more than 5 destinations under very special conditions
  - loading of old fx presets (load button was not active)
  - preselection of scopes (toolbox)
  - short signal drop (limiter release) when loading draw more comp plugin

[2.1] - 2024-05-06
=====================
Added
  - status box flashing on errors
  - amber SD icon when card is protected
  - hold monitoring MONO button to flip left/right channel (button blinking)
  - hold monitor section VIEW button to access usb recorder screen
  - source box shows headamp gain
  - meters, gate and comp gain reduction, group and main assignment shown on fader mixer page
  - fader levels on scribble strips
  - snapshot compatibility with new wing variants
  - sends on faders support for bus to bus routing (on left fader area)
  - in fx on fader mode, MUTE allows setting (eq) gains to 0 dB
  - DCA, BUS, FX and automix spill CC functions
  - DCA spill (left to center area and center to left area)
Changed
  - channel presets and toolbox functions now include source gain and phantom settings
  - restart button combination (after shutdown) set to HOME + EFFECTS
  - new Dante logo
  - main/matrix delay control moved to 'send to main' page (gui only)
  - rearranged SETUP screens
Fixed
  - triple DEQ and speaker manager DEQ width with negative gains (now identical to gate slot deq)
  - Custom control MIDI CC PUSH function not sending MIDI data
  - rare race condition when loading snippets containing source settings and input connections
  - customization link could mess up recall of channel/source customizations
  - Midas (blue) stage boxes now shown with solid green status boxes
  - gate sidechain filter bypassed when selecting some gate models
  - sd recorder remaining time display in link mode
  - sd sessions could be edited/deleted while playing
  - rare condition where the console would not sync to external clocks directly after startup
  - exclusive solo option not working on gui fader page
  - fw update function using invalid file name (rare, could lead to console not booting)
  - WING-DANTE with BK3 module not working with BK3 fw 4.2.7.7 (actually an Audinate issue, root cause to be fixed by them)
  - expansion card icon (top) not shown after soft reboot
  - time/date format not saved
  - issue where extended section (right fader section) rotaries were not working after using them for CC

[2.0] - 2023-09-11
=====================
Added
  - auto main/alt override switch (SETUP/AUDIO). Previous version behaviour is when this switch is set to on.
  - detailed options for sd recorder auto input switch
  - clear fader layer function
  - option to copy channel send settings to all channels (on send detail page)
  - option to reset/adjust send levels when changing global bus mode
  - sd link switch setting moved to persistent memory (and snapshots)
  - snippets, channel presets, fx presets added to library (old routing presets can be loaded as snapshots)
  - midi control and custom midi tx added to library
  - CC for scene management
  - autoload of show, snapshot, snippet (STARTUP folder in root of data partition), hold LIBRARY to skip
  - autoload during power-on, files need to be named STARTUP.show, STARTUP.snap, STARTUP.snip (they need to start with STARTUP, so STARTUP_myshow.show would also work).
  - CC for FX mix (if not included in plugin parameters), at the very end of the list
  - additional user patches 25-48 allow combining arbitrary sources to stereo user sources (with individual headamp gain and independent mute and polarity)
Changed
  - improved response of the dynamic eqs this is incompatible to existing snapshots, please readjust settings
  - use above with pos gain for dynamic enhancement
  - use above with neg gain to reduce harshness
  - use below with pos gain for dynamic loudness
  - use below with neg gain for noise/bleed reduction
  - SEL double click now always selects the first tab on the home page
  - SEL double click option to select bus insert fx page
  - channel toolbox allows copying to multiple targets (with auto increase of source assignments when more than one target is selected)
  - deadtime for fader autoselect (to reduce channel switching frequency when moving more than one fader)
  - sources for stereo or m/s user signals are no longer linked, please set them both manually
  - user signal customization no longer taken from sources
  - user signal highlight now shows if a signal is assigned to a user source (not if that user source is used)
Fixed
  - UTILITY button backlight and operation (when toolbox and option box are present)
  - issue where solo on buses was activated automatically even when not in sends-on-fader mode
  - global main/alt switch reset to main on boot when sd recorder auto input switch was activated
  - sd recorder now correctly opening a linked single session
  - using the wheel to set sd recorder playback position could lead to inconsistent sd player state
  - cursor control for GEQ faders
  - position of homescreen EQ indicators (gain)
  - selecting linked Wing-Live sessions could lead to console freeze

[1.13.9] - 2023-05-30
=====================
Added
  - peak hold for most of the meters
Changed
  - another change on USB audio interface code to further improve startup sync
  - USB host speed indicator updated when interface speed is actually changed (when idle)
Fixed
  - sd recorder selection and position control issues
  - CC automix enable buttons X/Y swapped

[1.13.8-16] - 2023-04-19
=====================
Changed
  - wheel function
  - on player page: hold 2-TRACK to move song position
  - other pages: hold 2-TRACK to scroll through playlist, or to move song position (when player in pause mode)
  - need to hold MULTITRACK when 'use crsr/wheel' is on to adjust wing-live song position
  - need to hold MULTITRACK when 'use crsr/wheel' and no wing-live card is present to use wheel for daw control
  - hold SHOW CTRL to use wheel to select scene (when not on library page)
  - modified behaviour of STOP and PLAY for usb player
  - when selected song is different from currently playing song, pressing PLAY will start the selected song instead going into pause mode
  - when selected song is different from currently playing song, pressing STOP will preload the selected song
  - fader firmware updated to support alternative components on fader pcbas
  - change on USB audio interface code that might help to solve those very rare startup issues (leading to noise/distorted audio)

[1.13.8-7] - 2023-04-18
=====================
Added
Changed
  - style of active snap/audio file highlight in file browser
  - send fader overview rearranged
  - lo/hi eq band frequency limits removed (shelvers with limited effective frequency range)
Fixed
  - hold functions of CC mode buttons (2-TRACK .. SHOW CNTRL)
  - backlight of CC cursor buttons
  - possible console slowdown when using cursor buttons
  - missing output level meter scale

[1.13.8] - 2023-04-14
=====================
Added
  - wheel can be used to select scene when SHOW CNTRL button is held
  - option to use cursor buttons and wheel to select/edit on-screen parameters
  - CC button option to show specific fader bank on screen (and select that bank)
  - manual configuration of console options:
  - to register or unregister an internal AoIP module start the console with the UTILITY button pressed
  - go to SETUP/GENERAL and touch the OPTIONS field next to 'CONSOLE'
  - enter MOD-DANTE and press APPLY to register an internal Audinate Dante module
  - enter MOD-NONE and press APPLY to deregister the internal module
  - restart the console
Changed
  - snap restore dialog in red color
  - (first time) lib opens with SNAP subpage selected
  - noise reduced when changing sync source without changing samplerate
  - CC button to show sends page now allows setting a specific send bus
Fixed
  - combinator in fx slot
  - affected by fx algo change in slot
  - (short mute)
  - eq bandtype box redraw issue (eq setup menu)
  - AES50 device I/O 'guide' frame size could be too large
  - issues related to winglive session list and copilot
  - issues related to winglive linked sessions
  - Removed
  - auto-detection of internal AoIP modules no longer possible
  - first boot with this firmware should automatically find and register an Audinate BK2 module
  - if a module is fitted but not found please follow the new manual configuration process

[1.13.7] - 2023-03-15
=====================
Fixed
  - usb recorder using bad filename leading to failure/recording not starting

[1.13.6] - 2023-03-10
=====================
Added
  - improved visibility of active snapshot/song
  - 'SoF activates solo' function expanded to main buses
  - external FX: click on send (output) box opens the output routing page
  - improved color scheme for scopes
Changed
  - some parameters moved for better snapshot recall experience (requires newest apps)
  - snapshot version incremented (8)
Fixed
  - minor issues

[1.13.4] - 2023-02-27
=====================
Changed
  - some cfg nodes moved
Fixed
  - minor issues

[1.13.3] - 2023-02-03
=====================
Added
  - usb host speed selector
Fixed
  - minor issues

[1.13.2] - 2023-01-31
=====================
Added
  - 'add all' button for playlist
  - autoadd option for new snaps
Fixed
  - scrollbar wrong range (playlist/library)
  - snaps/shows/playlists save directory
  - main pre send indication in channel detail section

[1.13.1] - 2023-01-27
=====================
Added
  - CC buttons for send view
  - CC buttons for global automix enable
  - delay factor 1/4 for stereo delay
  - meter subscriptions for 2nd gate/dyn state and automix gain
Changed
  - selected fader bank stored with fader bank recall scope
  - dynamic pos encoder scaling depending on size of winglive session
  - playlist and library changed from directory-based to file-based
Fixed
  - TAP indicator position update
  - winglive v2 updater
  - mute group state/name recall
  - winglive marker pos detection

[1.13.0] - 2023-01-13
=====================
Added
  - solo bus as source for matrix direct inputs (shout mixer)
  - pre-fader option for all sends to main 1-4
  - global automix enable switches
  - sends-on-fader gui page
  - headamp remote control (AES50)
  - source customization sync (AES50)
  - AES50 source indication
  - TCP remote control disable switch (sets all parameters to read-only)
  - CC buttons to set fader to -oo or 0 dB (hold CC and press SEL)
  - option to set gui fader to 0 dB (hold SELECT and touch and hold fader track/knob)
  - preview of scene management
  - touch'n'drag for (snapshot) scopes
  - support for new mainboard and winglive hw
Changed
  - DCA/MGRP assign method changed from group name to fixed tag (#D1..#D16, #M1..#M8)
  - tag color scheme
  - USB recorder page
  - Exciter FX SOLO renamed to DRY
  - OSC frequency control removed when in noise mode
  - source usage display now includes all routings (also to outputs)
  - snapshot version incremented (7)
  - AES50 connection state dark green for stageboxes with 'old' firmware (see issues below)
Fixed
  - SEL button backlight for FX faders
  - visibility of matrix mono status on overview screen
  - visibility of winglive battery status
  - aux eq was bypassed when insert was on and no fx selected
  - possible crash when using fw update function (leaving console with empty OS partition)
  - missing USB midi cable message (after startup)
  - fragmented ip packet assembly bug
  - small persisting red line in output box clip indicator
  - tcp retransmission bug (leading to connection drop with bad wifi)
  - dynamic stage connect routing
  - automix page refresh
Issues
  - when wing consoles are connected to both ports (A/B) of a stage box, headamp control will be lost. This requires a fix/update in the stagebox firmware.
  - old snapshots load slower than usual - save them again to fix
  - Deprecated
  - Removed
  - Behringer WING Series Firmware
  - Version 3.0.6 (24 Apr 2025)
  - WING firmware 3.0.6 introduces workflow improvements and enhancements for integration with the P24 personal monitoring system.
  - With each firmware update, a specific firmware file for each WING model is provided
  - (WING, WING COMPACT or WING RACK).
  - IMPORTANT NOTE: If you are using the WING-DANTE expansion card or the internal AoIP-Dante module,  you must also update the module’s firmware. Firmware files and update instructions are available on the product page and in the general downloads section.
New Features:
  - Source name transmission over StageConnect
  - Hold down the HA REMOTE / RCV CUST button to apply settings to all sources in the selected
  - group
  - Hold down STOP option button to apply settings to the whole clip playlist
  - AES50 error counter on the SETUP > AUDIO screen to help identify faulty cables and connections.
  - (COR = corrected; UNC = uncorrected)
  - WING COMPACT only: hold down any CC button and turn the rotary encoder below the main
  - meter to adjust FX parameters.
  - Reset EQ band by holding down the band selection button
  - SD recorder error messages shown in text form
  - CC button options to change CC bank
Changed:
  - Solo (POST) follows panning on INPUT and AUX channel, and DCAs
  - WING-LIVE displays a warning message if recording dropouts occur due to a slow SD card
  - musictribe.com
   - behringer.com
Fixed:
  - Toolbox “IN” copy option not available for all channel type combinations
  - CC assigned to SD recorder session list or marker list not working correctly on long sessions
  - CC display not updated when switching CC banks while a CC is held down
  - Sporadic audio clicks when using Dante
  - Short streams of digital zeros in transmitted audio when using Dante (when WING is Dante
  - clock leader) (BRK2 modules only)
  - Function could not be deactivated when using GPIO to set fixed fader levels.
  - TAP WIDTH not stored in SNIPPETS
  - These release notes are provided by Music Tribe Global Brands Ltd. (“Music Tribe”) for informational purposes only and are subject to change without notice.
  - Music Tribe makes no representations or warranties, express or implied, as to the accuracy, completeness, or suitability of the information contained herein.
  - These release notes apply only to the firmware version explicitly stated and may not apply to previous or future firmware versions.
  - Installation and use of firmware updates are at the user’s own risk. Firmware updates should only be installed by qualified users or authorized personnel in accordance with
  - the product documentation. Users are solely responsible for backing up all data and ensuring system compatibility prior to installation.
  - Any features or improvements listed are provided “as is” and may be modified or removed in future versions. This document does not constitute a warranty, service agreement,
  - or commitment of future functionality, and shall not modify or extend any warranty provided by Music Tribe.
  - For the most up-to-date firmware documentation and technical support resources, please visit: community.musictribe.com